Announcing HIGHSL

HIGHSL:  100% Panel-Flat, Stress-Free Sheet & Plate
Carbon steel from our Red Bud Industries® stretcher leveler arrives at your door flat, and it stays flat in your process. Our equipment stretches the material beyond its yield point to remove all the stresses introduced at the mill. Non-marking, non-slip grippers ensure that the material is clean and consistent every time.

HIGHSL: At Last, Worry-Free, Laser-Quality Processing

Whether you laser cut, punch, notch or shear, HIGHSL carbon steel remains flat during fabrication. Our heavy-duty, fully adjustable Red Bud Industries┬« stretcher leveler relieves the random trapped internal stresses that can cause material to spring back after being cut. This ensures that your parts will be flat, and that you will experience less rejection and scrap.

 

The first in the Mid-Atlantic region, our stretcher leveler works by stretching the entire cross section of the strip beyond its yield point from top to bottom and side to side. Only in this way can the random stresses be effectively equalized, and spring back eliminated. The material is actually stretched only a small amount by non-marking metallic grippers that handle even heavily-oiled material.

 

HIGHSL: Run to Specification Every Time, "Lights Out"

 

HIGHSL improves process efficiency because you can run uninterrupted by material issues.

HIGHSLStretcher Leveler Capacity
                           Gauge:
                    Maximum Thickness..............0.50"   (12.7 mm)
                    Minimum Thickness...............0.060" (1.52 mm)
 
                    Sheet Size:
                    Maximum Width....................72.0"   (1,829 mm)

HIGHSL: 
One more reason High Steel Service Center is The Dependability Difference┬«.

HIGHSL: See Feature News Articles
                     Coil World and Metal Center News

High Steel Service Center LLC

400 Steel Way

Lancaster, PA 17601

717.299.8989 - Local

800.732.0346 - Toll Free

Address

400 Steel Way Lancaster, PA 17601

Phone number

Toll-free: 800.732.0346

Fax: 717.299.5155